Links to all source files of this tutorial

• 8515std.asm Standard assembler source file for an AT90S8515
• ADC8.asm 8-Bit-AD-converter
• akkuload.zip Source code for a charger for cells with an ATmega16
• avr_pwm1.pas Pascal command line simulator for selecting R and C for DAC PWMs
• header_tn13 Standard assembler source file for a Tiny13 with interrupts
• CLOCK.asm DCF77 synchronised digital clockwith AT90S2313 and RS232 interface
• digiclock.asm Digital clock with ATmega16 and 7-segment displays
• DIV8E.asm Demonstrates division of a 16-bit binary by 8-bit binary
• eggtimer.asm Minutes timer with green/red LEDs
• eggtimer_3.asm dto., with scaled tones
• fcountV03.asm Measuring frequency, RPM, pulse width and voltage with an ATmega8
• FP_CONV10_EN.asm Demonstrates 10-bit-binary to floating point decimal conversion
• FP_CONV8_EN.asm Demonstrates 8-bit-binary to floating point decimal conversion
• ircsb_v1.asm Receives IR remote control signals with an ATtiny13
• ir_remoteV1.asm Measures IR remote control signals with an ATmega8
• LCD_INC.asm LCD interface routines for an LCD attached to a STK200 board (memory-mapped)
• LCD_TEST.asm Displays Hello World on a LCD on a STK200 board, requires interface routines
• Lcd4IncE.asm 4-bit-LCD interface routines for a single port
• Lcd4IncCE.asm 4-bit-LCD interface routines for a STK500 port
• led-grave_m16_v1.asm 8-by-8 LED matrix for an ATmega16
• MULT8E.asm Demonstrates software multiplication of two 8-bit binaries
• MUSIC.asm Music on a STK200 with a R/2R DA network
• PCM2PWG4.asm PCM decoder drives a PWM signal on an AT90S2323
• PWGSIO2.asm RS232 programmable pulse width generator on an AT90S8515 on the STK200 board
• r2r.pas Pascal command line source for a R/2R network
• R/2R: sawtooth1 Sawtooth signal on a DAC with a R/2R network
• R/2R: sawtooth2 dto., without bit 7
• R/2R: sinewave Sinewave signal on a DAC with a R/2R network
• Pascal command line source for generating sinewave tables
• sine8_25.txtWave table for a sine on a DAC with a R/2R network
• SIOHEX.asm RS232: Echoes the received characters back as hex
• steppermotor_v1.asm Steppermotor control with an analogue voltage with an ATtiny13
• TEST1.asm Extensively commented assembler source code to turn on LEDs
• TEST2.asm Extensively commented assembler source code to input keys, call subroutines, etc.
• TEST3.asm Extensively commented source code to start a timer and poll its content
• TEST4.asm Extensively commented source code for a timer in interrupt mode
• TESTEEP.asm Demonstrates writing and reading EEPROM content
• TESTJMP.asm Demonstrates jumping via the stack
• TESTKBD.asm Demonstrates reading a 4-by-3-keypad and identifying pressed keys
• TESTLCD.asm Tests a LCD attached to a STK200 board (memory-mapped)
• TESTLPM.asm Demonstrates the instruction LPM to read from program storage
• TESTMAC1.asm Demonstrates the use of macros
• TESTMAC2.asm Demonstrates labels inside macros
• TESTMAC3.asm Demonstrates parameters for macros
• TESTRAM.asm Tests external SRAM on a STK200 board
• TESTSIO.asm Tests RS232 communication by sending characters and echoing received characters
• timer_v1.asm Timer application for an ATtiny2313 with LCD and keys
• tiny45_tx_v2.asm Transmits IR remote control signals with an ATtiny45
• R/2R: triangle R/2R: Tringle voltage on a R/2R network